FORTIS
High frequency modular traction battery charger.
FORTIS 80D75
Output voltage
80 V
Output current
75 A
Input current
12.9 A
Product description
FORTIS chargers are designed for industrial use, mainly for charging of traction deep-cycle batteries for electric vehicles. Chargers are intended for charging of batteries with Unom 12V-96V and current from 25A. (Chargers of other power on request). Chargers are modular construction, consist of control unit and power module(s) (input 1ph 230VDC or 3ph 400VDC). At FORTIS chargers could be set charging curve and battery capacity.
Operational stages are signaled by three LED lights on the front panel, the status of charging is visible from long distance. Output current is adjustable to battery capacity. FORTIS chargers comply with European standards of using PFC at electronic devices.
- User friendly
- Saves expenses for operating
- Very high reliability
- Efficiency up to 95%, power factor cos φ ~1
- Active PFC and soft-start
- Verification of connected battery
- High resistance to mains disturbances
- Galvanic separated mains - output
- Regeneration charging – desulphation and equalization
- Galvanic separated mains - output
- Modular system
Specification
Efficiency
: up to 94%
Output voltage stability
: +-1%
Cooling
: active fans
Air pump
: No
Degree of protection
: IP20
Operating temperature
: -10°C to +40°C
Safety class
: 1
Standards
: EN 61000-6-2, EN 61000-6-4, EN 62368-1
Weight
: 26.00 Kg
Dimensions
| Case | Width | Height | Depth | X | Y |
|---|---|---|---|---|---|
| FF250 | 302 | 477 | 254 | 230 | 515 |
Dimensions in milimetres [mm] X and Y are positions of mounting holes
Download
